Hotline0510-85616768
304/316/316L Precision Machining
Thin-wall push rings typically have a wall thickness of 1~3mm with low rigidity, making clamping deformation and cutting chatter likely during machining.
Thin-wall bushings reduce friction, position or isolate between shafts and housing bores; with small wall thickness and a large length-to-diameter ratio, inner/outer circle coaxiality requirements are prominent.
Baffle plates guide medium flow and improve velocity distribution in flow channels, with curved surfaces and mounting holes often on the plate.
Precision screen plates are used where screening accuracy demands are high, requiring strict control of hole diameter tolerances and accumulated hole spacing errors.
Threaded rings adapt or lock at threaded connections, with thread profile angle, pitch and pitch diameter as the main control items.
Push rings are used for axial pushing and clearance adjustment in shaft systems or hydraulic mechanisms; with thin ring walls, they require high end face parallelism and roundness.
Glands are used for axial positioning and sealing compression at bearing ends and hole openings, turned from 304/316 stainless steel bar stock or forging blanks.
Plum-profile contour glands are used for end positioning where clearance or weight reduction is needed, with the coaxial relationship between the irregular outer contour and inner bore as the main control item.
Support seats carry the weight of shaft systems or components and fix relative positions, with bottom flatness and mounting hole relative positions as the key factors.
Bushings serve as support and wear-resistant liners for shaft systems, with inner bore accuracy and surface roughness directly affecting fit clearance and service life.
Casting support seats provide the connection between components and foundations, with joint surface fit and mounting hole positions determining stability during equipment operation.
Assemblies are built from multiple stainless steel parts machined through turning, milling and drilling, suited to locations with complex structures that a single part cannot form.
Drill bushings are slender tubular parts; through-hole straightness and wall thickness uniformity determine guiding accuracy, requiring prevention of deep-hole drilling deflection.
Fill in the information below, and we will contact you within 12 hours